Grand Meyer® EcoNG170
Twin-core electric heating mat “Grand Meyer® EcoNG170” is designed for comfortable underfloor heating in any type of premises. Can be used under any surface: ceramic tiles, marble, linoleum or carpet. It is mounted both on a new floor base and on an existing floor during the repair of a room, when it is very important to maintain a small thickness of the floor base.
Heating cable design
- Stranded heating conductors made of CuNi, CuCr, NiCr alloys depending on the resistance.
- Internal insulation made of heat-resistant cross-linked polyethylene of the new generation XPLE.
- Aluminum foil screen.
- Drain conductor made of stranded Al-Mg wires.
- External insulation made of PVC-modified polyvinyl chloride with increased heat resistance.
- Synthetic fiberglass mesh 50 cm wide.
- Splice.
Cold Lead 3.0m long.
The thickness of the heating cable is only 3.6 mm, which allows to use the minimum thickness of the tile adhesive.
The heating cable is securely sewn to an ultra-thin and durable synthetic mesh with a thickness of only 0.2 mm, which does not deform when laid out.
Technical characteristics of EcoNG heating mats
|
CABLE ARTICLE
|
SIZE (WIDTH X LENGTH), M
|
LAYING AREA, M²
|
POWER, W
|
CURRENT, A
|
RESISTANCE, OHM
|
CABLE LENGTH, M
|
|---|---|---|---|---|---|---|
|
EcoNG170-010
|
0,5 x 2,0
|
1,0
|
170
|
0,7
|
287 ... 388
|
10,2
|
|
EcoNG170-015
|
0,5 х 3,0
|
1,5
|
255
|
1,0
|
192 ... 259
|
15,4
|
|
EcoNG170-020
|
0,5 х 4,0
|
2,0
|
340
|
1,4
|
144 ... 194
|
20,5
|
|
EcoNG170-025
|
0,5 х 5,0
|
2,5
|
425
|
1,7
|
115 ... 155
|
25,6
|
|
EcoNG170-035
|
0,5 х 7,0
|
3,5
|
595
|
2,4
|
82 ... 111
|
35,9
|
|
EcoNG170-045
|
0,5 х 9,0
|
4,5
|
765
|
3,1
|
64 ... 86
|
46,1
|
|
EcoNG170-055
|
0,5 х 11,0
|
5,5
|
935
|
3,8
|
52 ... 70
|
56,4
|
|
EcoNG170-065
|
0,5 х 13,0
|
6,5
|
1105
|
4,4
|
44 ... 59
|
66,6
|
|
EcoNG170-070
|
0,5 х 14,0
|
7,0
|
1 190
|
4,8
|
41 ... 55
|
71,7
|
|
EcoNG170-080
|
0,5 х 16,0
|
8,0
|
1 360
|
5,5
|
36 ... 48
|
82,0
|
|
EcoNG170-090
|
0,5 х 18,0
|
9,0
|
1 530
|
6,1
|
32 ... 43
|
92,2
|
|
EcoNG170-110
|
0,5 х 22,0
|
11,0
|
1 870
|
7,5
|
26 ... 35
|
112,7
|
|
EcoNG170-130
|
0,5 х 26,0
|
13,0
|
2 210
|
8,9
|
23 ... 30
|
|
|
EcoNG170-150
|
0,5 х 30,0
|
15,0
|
2 550
|
8,9
|
19 ... 26
|
|
|
SPECIFICATIONS OF THE HEATING CABLE
|
|
|---|---|
|
Cable type
|
twin-core screened
|
|
Power supply
|
~230V
|
|
Specific power at rated voltage
|
170 W/m²
|
|
Maximum operating temperature
|
+90⁰С
|
|
Minimum installation temperature
|
-10⁰С
|
|
Cable outer diameter
|
3.6 mm
|
|
Mat thickness
|
3.8 mm
|
|
Mat mesh width
|
50 cm
|
|
Installation wire feeding the heating mat
|
3.0m, PVC 3x1.0mm²
|
|
Color of connected wires
|
brown - phase (L), blue - zero (N), yellow-green - "ground" (PE)
|
Contents of delivery
- Heating mat EcoNG170
- Corrugated tube made of self-extinguishing PVC with plug for temperature sensor
- System installation instructions
- Warranty card
To control the operation of a warm floor, we recommend using
Installation of the heating section
Primer layer of glue
Floor base
Heating mat
Ceramic tile
Tile adhesive
This product is a separate heating unit, falling under the scope of Regulation (EU) 2024/1103. Click here to mandatory EcoDesign requirements.