Heat'n'Warm® EcoNG150
Twin-core electric heating mat “Grand Meyer® EcoNG150” is designed for comfortable underfloor heating in any type of premises. Can be used under any surface: ceramic tiles, marble, linoleum or carpet. It is mounted both on a new floor base and on an existing floor during the repair of a room, when it is very important to maintain a small thickness of the floor base.
Heating cable design
- Stranded heating conductors made of CuNi, CuCr, NiCr alloys depending on the resistance.
- Internal insulation made of heat-resistant cross-linked polyethylene of the new generation XPLE.
- Aluminum foil screen.
- Drain conductor made of stranded Al-Mg wires.
- External insulation made of PVC-modified polyvinyl chloride with increased heat resistance.
- Synthetic fiberglass mesh 50 cm wide.
- Splice.
Cold Lead 3.0m long (PVC 3×1.0mm²).
The thickness of the heating cable is only 3.6 mm, which allows to use the minimum thickness of the tile adhesive.
The heating cable is securely sewn to an ultra-thin and durable synthetic mesh with a thickness of only 0.2 mm, which does not deform when laid out.
Technical characteristics of EcoNG heating mats
|
CABLE ARTICLE
|
SIZE (WIDTH X LENGTH), M
|
LAYING AREA, M²
|
POWER, W
|
CURRENT, A
|
RESISTANCE, OHM
|
CABLE LENGTH, M
|
|---|---|---|---|---|---|---|
|
EcoNG150-010
|
0,5 x 2,0
|
1,0
|
150
|
0,7
|
287 ... 388
|
10,2
|
|
EcoNG150-015
|
0,5 х 3,0
|
1,5
|
225
|
1,0
|
192 ... 259
|
15,4
|
|
EcoNG150-020
|
0,5 х 4,0
|
2,0
|
300
|
1,4
|
144 ... 194
|
20,5
|
|
EcoNG150-025
|
0,5 х 5,0
|
2,5
|
375
|
1,7
|
115 ... 155
|
25,6
|
|
EcoNG150-035
|
0,5 х 7,0
|
3,5
|
525
|
2,4
|
82 ... 111
|
35,9
|
|
EcoNG150-045
|
0,5 х 9,0
|
4,5
|
675
|
3,1
|
64 ... 86
|
46,1
|
|
EcoNG150-055
|
0,5 х 11,0
|
5,5
|
825
|
3,8
|
52 ... 70
|
56,4
|
|
EcoNG150-065
|
0,5 х 13,0
|
6,5
|
975
|
4,4
|
44 ... 59
|
66,6
|
|
EcoNG150-070
|
0,5 х 14,0
|
7,0
|
1 050
|
4,8
|
41 ... 55
|
71,7
|
|
EcoNG150-080
|
0,5 х 16,0
|
8,0
|
1 200
|
5,5
|
36 ... 48
|
82,0
|
|
EcoNG150-090
|
0,5 х 18,0
|
9,0
|
1 350
|
6,1
|
32 ... 43
|
92,2
|
|
EcoNG150-110
|
0,5 х 22,0
|
11,0
|
1 650
|
7,5
|
26 ... 35
|
112,7
|
|
EcoNG150-130
|
0,5 х 26,0
|
13,0
|
1 950
|
8,9
|
23 ... 30
|
|
|
EcoNG150-150
|
0,5 х 30,0
|
15,0
|
2 250
|
8,9
|
19 ... 26
|
|
|
SPECIFICATIONS OF THE HEATING CABLE
|
|
|---|---|
|
Cable type
|
twin-core screened
|
|
Power supply
|
~230V
|
|
Specific power at rated voltage
|
150 W/m²
|
|
Maximum operating temperature
|
+90⁰С
|
|
Minimum installation temperature
|
-10⁰С
|
|
Cable outer diameter
|
3.6 mm
|
|
Mat thickness
|
3.8 mm
|
|
Mat mesh width
|
50 cm
|
|
Installation wire feeding the heating mat
|
3.0m, PVC 3x1.0mm²
|
|
Color of connected wires
|
brown - phase (L), blue - zero (N), yellow-green - "ground" (PE)
|
Contents of delivery
- Heating mat EcoNG150
- Corrugated tube made of self-extinguishing PVC with plug for temperature sensor
- System installation instructions
- Warranty card
To control the operation of a warm floor, we recommend using
the Grand Meyer temperature controllers. 
Installation of the heating section
Primer layer of glue
Floor base
Heating mat
Ceramic tile
Tile adhesive
